Konica Minolta bizhub 500 User Manual page 321

Application Functions
6
7
8
9
Downloaded From ManualsPrinter.com Manuals
bizhub 500/420/360 (Phase 3)
Specify the binding margin.
– Use [+] and [–] to enter the desired value in 0.1 mm increments.
– When [None] is highlighted, the margin is automatically set to 0 mm.
Use [None] for correcting the image orientation of double-sided
copy.
What should be done if wrong value is entered?
?
% Press [C] (Clear) on the control panel, then reenter the correct value.
What if the value just entered is out of available range?
?
% The Input Error message will be displayed. Press [C] (Clear) on the
control panel, then reenter the correct value.
Is it available to change the binding position even if the margin is
?
already specified?
% Yes. The binding position can be changed at any time.
Touch [OK] to return to the Application Screen.
– Touch [Cancel] on the Page Margin Screen to cancel the setting
change.
Select additional copy conditions, as desired.
Press [Start] on the control panel.
The machine will start scanning the original, then printing when ready
for output.
6
6-79