Before Making Copies
To interrupt the sleep mode to activate the machine
%
!
!
Downloaded From ManualsPrinter.com Manuals
bizhub 500/420/360 (Phase 3)
Position the original.
–
Pressing any key also returns the machine to an operational state.
The touch panel display reappears and, after the machine has finished
warming up, it is ready to operate again.
Detail
Originals can be scanned while the machine is warming up. For details,
refer to "Setting Job During Warmup" on page 4-73.
Detail
The length of time before the machine enters Sleep mode can be
changed. For details, refer to "1 Power Save Setting" on page 16-34.
If the time for entering Low Power mode and Sleep mode are the same,
the machine will immediately enter Sleep mode without entering Low
Power mode.
3
3-39