Regulation Notices; Ce Marking (Declaration Of Conformity) For Users Of The European Union (Eu); User Instructions Fcc Part 15 - Radio Frequency Devices (For U.s.a. Users); Interference-Causing Equipment Standard (Ices-003 Issue 4) (For Canada Users) - Konica Minolta bizhub 500 User Manual

2
2.2

Regulation Notices

CE Marking (Declaration of Conformity) for Users of the European Union
(EU)
This product complies with the following EU directives:
89/336/EEC, 73/23/EEC and 93/68/EEC directives.
This declaration is valid for the area of the European Union.
This device must be used with a shielded network (10 Base-T/100 Base-TX)
cable and a shielded parallel cable. The use of non-shielded cables is likely
to result in interference with radio communications and is prohibited under
CISPR rules and local rules.
USER INSTRUCTIONS FCC PART 15 - RADIO FREQUENCY DEVICES
(For U.S.A. Users)
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own expense.
7 WARNING
The design and production of this unit conform to FCC regulations, and
any changes or modifications must be registered with the FCC and are
subject to FCC control.
%
%
INTERFERENCE-CAUSING EQUIPMENT STANDARD (ICES-003
ISSUE 4) (For Canada Users)
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du
Canada.
Downloaded From ManualsPrinter.com Manuals
2-12
Any changes made by the purchaser or user without first contacting
the manufacturer will be subject to penalty under FCC regulations.
This device must be used with a shielded network (10 Base-T/100
Base-TX) cable and a shielded parallel cable. The use of non-shielded
cables is likely to result in interference with radio communications and
is prohibited under FCC rules.
Installation and Operation Precautions
bizhub 500/420/360 (Phase 3)