Konica Minolta bizhub 500 User Manual page 235

Combine Originals/ Original Image Type
0 Load the original in the ADF.
0 This setting functions effectively when 2%2 or 2%1 mode is specified in
0 The Margin setting will not be cleared after a job completion until the
1
2
3
Downloaded From ManualsPrinter.com Manuals
bizhub 500/420/360 (Phase 3)
Simplex/Duplex setting.
reset function is activated.
The machine can be set to reset the Margin setting to the factory default
each time a single job is completed. For details, see "9 Reset Setting > 3
Job Reset" on page 16-93.
Load the original in the ADF.
Touch [Combine Originals] tab on the Basic Screen.
The Combine Originals Screen will be displayed.
Touch [Margin].
The Page Margin Screen will be displayed.
5
5-19