Basic Copy Operations
To specify paper type
Specify the special paper type for the bypass tray.
After a setting change has been made, the machine may adjust the fixing
temperature or limit the output tray to be used depending on the specified
paper type.
This setting also prevents the special paper loaded in bypass tray from being
fed automatically when Auto Paper Select or Auto Tray Switch functions.
When using OHP transparencies or any special paper, be sure to specify this
setting to avoid unexpected feeding.
0 This setting is indispensable for OHP transparencies, thick paper, or thin
0 Setting options are Recycled, Thick Paper, Thin Paper, OHP, Envelope,
0 When printing on envelopes, open the right-hand door of the machine
0 The special paper setting of bypass tray will be cleared to the normal type
1
Downloaded From ManualsPrinter.com Manuals
bizhub 500/420/360 (Phase 3)
paper to be loaded in the bypass tray.
Letterhead, Trace, User, Labels, and Colored Paper.
and pull up the envelope levers. For details, see "To load paper into the
bypass tray" on page 3-61.
setting, when the machine is reset to the initial setting.
Touch [Paper] on the Basic Screen.
The Paper Screen will be displayed.
4
4-33