Konica Minolta bizhub 500 User Manual page 613

Utility <User Setting>
1
2
3
4
5
6
7
Downloaded From ManualsPrinter.com Manuals
bizhub 500/420/360 (Phase 3)
First specify the copy settings to be used as initial setting, if factory
default is not desired.
Press the [Utility/Counter] to display the Utility/Counter Screen.
Touch [2 User Setting] to display the User Setting Screen.
Touch [3 Initial Setting].
The Initial Setting Screen will be displayed.
Touch [Current Setting] or [Factory Default] to highlight it.
Touch [OK] to complete the setting.
– To cancel the change, touch [Cancel].
In either case, the User Setting Screen will be restored.
If further changes are required, touch the desired key.
15
15-35