To Load Paper Into The Bypass Tray - Konica Minolta bizhub 500 User Manual

Before Making Copies

To load paper into the bypass tray

Paper can be fed manually through the bypass tray if you wish to copy onto
paper that is not loaded into, or cannot be fed from, a paper tray, paper feed
cabinet or large capacity unit, such as thick paper, envelopes, overhead
projector transparencies or label sheets.
0 Use the Paper screen to specify the size of the paper that is not
0 Some types of special paper requires to be positioned in a certain
1
2
Downloaded From ManualsPrinter.com Manuals
bizhub 500/420/360 (Phase 3)
detectable automatically (for example, paper in inch size, or custom-
sized paper), or the special type of paper such as thick paper or overhead
projector transparencies. For details, refer to "Paper Setting for Bypass
Tray" on page 4-23.
orientaion. For details, refer to "To load paper into a large capacity unit"
on page 3-59.
Open the bypass tray.
– When loading large-sized paper,
pull out the tray extension.
Load the paper into the tray.
– The image will be printed on the
surface of the paper facing down
when the paper is loaded into the
bypass tray.
– Insert the paper as much as
possible into the feed slot.Paper
can be loaded up to 150 sheets
2
(80 g/m paper) of thickness.
3
3-61