To Position The Original On Original Glass - Konica Minolta bizhub 500 User Manual

Basic Copy Operations

To position the original on original glass

0 For details of the original types available on the original glass, see
0 The machine will automatically detect the original size positioned on the
0 Be sure to position the original in the specified orientation.
0 Do not place the original weighing over 6.8 kg on the original glass, or do
0 For the original of thick books or solid objects, start scanning with the
1
2
Downloaded From ManualsPrinter.com Manuals
bizhub 500/420/360 (Phase 3)
"Originals" on page 10-15.
original glass, then select an appropriate paper size by Auto Paper Select
function.
For details, see "Specifying Orientation of Original (Original Direction)" on
page 5-14.
not press strongly down on an open book placed on the original glass;
otherwise the machine trouble may be caused.
ADF kept open.
In this case, a bright light may beam through the glass. Be careful not to
look directly at the original glass.
Raise the ADF.
Position the original FACE DOWN on the original glass.
– If original direction has not been specified, place the original in the
rear left corner, with its top toward the rear side.
4
4-11