16
3
Downloaded From ManualsPrinter.com Manuals
16-78
Adjust the dislocation of staple position on each paper size, referring to
a sample copy made by using Fold & Staple mode.
–
Touch [1 Center Staple Position] to display the Center Staple
Position Screen.
–
Select the paper size to be adjusted, then touch [Test Copy].
The Test Copy Screen will be displayed.
–
Press [Start] to make a sample copy. When completed, touch
[Close] to return to the Center Staple Position Screen.
–
Compare the page widths of left and right pages to check the
center line of the sample copy. Change the adjustment value if
satisfactory result is not obtained.
Touch [+] to enter the adjustment value if the staple position is off
the center to the right. (Range: 0.5 mm ~ 5.0 mm)
Contrary, touch [–] if it is off the center to the left. (Range: –0.5 mm
~ –5.0 mm)
–
Repeat this procedure until a satisfactory result is obtained.
Utility <Administrator Setting>
bizhub 500/420/360 (Phase 3)