Konica Minolta bizhub 500 User Manual page 92

3
!
Detail
When the control panel is turned on by using the sub power switch, the
indicator on the Start key lights up in orange, and a screen indicating that
the machine is starting up appears. After a few seconds, the message
"Now warming up. Ready to scan." is displayed, and the indicator on
[Start] key lights up in green, indicating that originals can now be scanned
and later printed when the copying functions becomes available. For
details, refer to "Next Job Reservation" on page 4-75.
!
Detail
User name and password may need to be entered to activate the
machine if the user authentication or account track function has been
introduced to the machine. For details, refer to "To enter a user name and
password (user authentication)" on page 3-45.
The user may also be required to insert a key counter or copy card into
the machine. Follow the instructions accordingly.
!
Detail
Default settings are those settings that have not been changed since the
power is turned on, or that are available after pressing [Reset] to reset all
the previously specified settings.
The default settings can be changed. For details, refer to "3 Initial
Setting" on page 15-34.
The factory default settings are the settings that were set when this
machine was shipped from the factory.
Downloaded From ManualsPrinter.com Manuals
3-32
Before Making Copies
bizhub 500/420/360 (Phase 3)