1
1.5
Descriptions and Symbols for Original and Paper
The use of words and symbols in this manual are explained below.
"Width" and "Length"
Whenever paper dimensions are
mentioned in this manual, the first value
always refers to the width of the paper
(shown as "Y" in the illustration) and the
second to the length (shown as "X").
Paper Orientation
Lengthwise (w)
If the width (Y) of the paper is shorter than
the length (X), the paper has a vertical
orientation, indicated by w.
Crosswise (v)
If the width (Y) of the paper is longer than
the length (X), the paper has a horizontal
orientation, indicated by v.
Downloaded From ManualsPrinter.com Manuals
1-18
Introduction
bizhub 500/420/360 (Phase 3)