Konica Minolta bizhub 500 User Manual page 355

Application Functions
7
8
Downloaded From ManualsPrinter.com Manuals
bizhub 500/420/360 (Phase 3)
– Touch [OK] to complete the setting.
Touch [Print Position] to display the Print Position Screen.
– Touch one of the nine Print Position keys to highlight it.
– If fine adjustment is not required, proceed to step 9.
Touch [Change Adjustment] to display the Fine-Tune Screen.
– Touch [Left] or [Right] under Left & Right Adjustment to highlight it.
Use [+] and [–] to enter a fraction in 0.1 mm increments. Touch the
bidirectional arrow key to move the cursor, then use [+], [–], or
control panel keypad to enter whole number part of the desired
value.
Similarly, touch [Top] or [Bottom] under Top & Bottom Adjustment
to highlight it, then enter the desired value.
To deactivate these adjustment, touch [No Adj.] for each.
Do you want to change the currently entered value using control
?
panel keypad?
% Press [C] (Clear) on the control panel, then enter the correct value.
6
6-113