Positioning Original On Platen Glass - Konica Minolta bizhub pro c500 User Manual

Positioning Original on Platen Glass

Use the platen glass when originals are not suitable for use with the document
feeder, e.g., when size is incompatible, or when originals are folded, stapled, torn, or
in generally poor condition.
1.
Raise the document feeder or platen cover.
2.
Place original FACE DOWN in the left rear corner.
The direction of the original should conform to the Original direction icon
displayed at the upper left corner of the Basic Screen.
The copy result may not be satisfactory if the original is set in wrong direction.
Be sure that the original is set in the same direction as indicated by the
Original direction icon, especially when making double-sided copies or using
Staple, Stitch&Fold, Fold, or Booklet mode. See p. 9-2 to p. 9-3 for details.
3.
Gently close the document feeder or platen cover to prevent the
original from shifting on the glass.
When selecting Dual Page, Non-Image Area Erase, AUTO mode in Repeat,
or AUTO Layout, DO NOT CLOSE the document feeder. For details on each
function, see Section 10.
3-8
Positioning Originals (continued)