Place The Original On The Platen Glass; Precautions For Placing The Original On The Platen Glass - Konica Minolta Printer Copier User Manual

4
4.3

Place the Original on the Platen Glass

The method for positioning the original differs depending on the type of original being used. Be
sure to use the appropriate method that best suits the type of original. Refer to p.4-2 for
information on using the Automatic Document Feeder.

Precautions for Placing the Original on the Platen Glass

Care should be used when positioning the following types of originals.
An original of a nonstandard size:
G The copier is unable to detect the original size automatically, meaning that neither APS nor
AMS can be used. Therefore, use the [SIZE] key to select the paper size, or the [RE] key
to select the zoom ratio. (p.5-11)
A highly transparent original (OHP transparencies, translucent paper, etc.):
G Place a blank sheet of paper of the same size over the original. (p.4-8)
A book or other three-dimensional object:
G Let the copier scan the contents of the original with the Original Cover or the Automatic
Document Feeder raised. Do not attempt to push the Platen Glass with excessive force, as
a malfunction could result. (The maximum load resistance of the Platen Glass is 6-1/2 lbs.)
4-6
Loading Originals
Konica 7115/7118