Operation Guide On The Xml Configuration File (On The U2000); Figure 3-11 Importing The Xml Configuration File - Huawei HG8240 Service Manual

3 Configuration

Figure 3-11 Importing the XML configuration file

4.
----End
3.6.2 Operation Guide on the XML Configuration File (on the
U2000)
This topic describes how to issue the XML configuration files on the U2000.
Prerequisite
The Layer 2 service channels between the OLT and ONTs are enabled by running the OLT
commands. For details, see
a GPON ONT (on the OLT
Context
Issuing the XML configuration file on the U2000 applies to the following two typical scenarios:
l
l
Procedure
l
3-234
The configuration will take effect after the ONT restarts automatically.
3.4.1.1 Enabling Layer 2 Service Channels Between an OLT and
Configuring an ONT
Configuring ONTs in batches
Configure an ONT.
1. Export the XML configuration file.
(1) In the Physical Map navigation tree on the Main Topology tab page, double-
click the target OLT, or select the target OLT, right-click, and choose NE
Explorer.
(2) In the navigation tree, choose GPON > GPON ONU.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
EchoLife HG8240/HG8245/HG8247 GPON Terminal
CLI).
Service Manual
Issue 04 (2011-01-12)