Huawei EchoLife HG8245 Quick Start Manual
Gpon terminal
Hide thumbs
Also See for EchoLife HG8245:
- Product description (23 pages) ,
- Quick start manual (20 pages) ,
- Service manual (364 pages)
Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Huawei EchoLife HG8245
Summary of Contents for Huawei EchoLife HG8245
- Page 1 EchoLife HG8245 GPON Terminal Quick Start...
-
Page 2: Quick Start
EchoLife HG8245 GPON Terminal V100R002C06 Quick Start Issue Date 2011-06-30 BOM number 31505131 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. - Page 3 No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders.
-
Page 4: Safety Precautions
Safety Precautions To use the device properly and safely, read the safety precautions carefully before using the device and strictly observe these precautions when using the device. Basic Requirements Keep the device dry when it is stored, transported, and used. �... -
Page 5: Instructions For Use
Safety Precautions Instructions for Use Use only the accessories delivered or recommended by the supplier, for � example, the power adapter and battery. The power supply voltage of the device must meet the requirements for � the input voltage of the device. Keep the power plug clean and dry to prevent electric shocks or any �... -
Page 6: Packing List
Packing List After opening the product packaging, check each item against the following checklist. Contact the supplier if there are any discrepancies. GPON terminal Power adapter Quick Start Network cable NOTE The figures shown in this document may differ from the actual products, but the difference does not affect the functions of the products. -
Page 7: Product Overview
Product Overview Appearance and ports of the HG8245 Optical port Ethernet port POTS port Power switch Indicator Power port Backup battery monitoring port USB port WLAN switch RESET WPS switch... - Page 8 Installing the GPON Terminal NOTE 1. HG8245 can be mounted onto a wall or be placed on a workbench. 2. Other installation modes are not allowed. Perform the following operations to mount HG8245 onto the wall. Step 1 Mark the positions of two holes, keeping the holes 72 mm from each other. Step 2 Select a proper drill according to the outer diameter of the screws.
-
Page 9: Connecting Cables
Connecting Cables Cable Connections Between the HG8245 and Other Devices Optical port in the wall IP STB Phone Fax machine TV set USB storage device Power socket Backup battery unit Wi-Fi terminal... - Page 10 Connecting Cables Refer to the preceding cable connections of each product and select the following corresponding steps to connect the GPON terminal. Step 1 Use an optical fiber to connect the OPTICAL port on the GPON terminal to the optical port in the wall. NOTE The optical connector connected to the OPTICAL port on the HG8245 is an SC/APC connector, and the type of the optical connector connected to the optical port in the...
- Page 11 Logging in to the Web Configuration Window Perform the following steps to log in to the Web configuration window of a GPON terminal. Step 1 Set the IP address of the PC in the same subnet 192.168.1.64 192.168.1.253. – Example: - IP address: 192.168.1.100 - Subnet mask: 255.255.255.0 NOTE...
-
Page 12: Indicator Description
Indicator Description Table 1 Indicator status description 1 Indicator Status Description Steady on The WPS function is enabled. Blinking A Wi-Fi terminal is connecting to the system. The WPS function is disabled. Steady on The WLAN function is enabled. WLAN Blinking Data is being transmitted. - Page 13 Indicator Description PON is GPON indicator. The status of PON reflects the connection between GPON terminal and . The following table describes the status of the PON its upper-layer device indicator. Table 2 Indicator status description 2 Indicator Status Description The fiber connection between the terminal and the uplink Green steady on device is set up.
- Page 14 FAQs The POWER indicator Is off. Check whether the ON/OFF button on the rear plane is depressed. � Ensure that the power adapter matches the GPON terminal. � � Check whether the power supply is connected properly. The LAN indicator is off. Ensure that the network cable matches the GPON terminal.
-
Page 15: Technical Specifications
Technical Specifications Item HG8245 Dimensions(H x W x D) 195mm×174mm×34mm Weight (including the power adapter) About 550g System power supply 11V – 14V DC, 2A Power adapter input 100V – 240V AC 50Hz – 60Hz Maximum system power consumption Ambient temperature C –... -
Page 16: Warranty Card
Warranty Card Thank you for choosing Huawei Technologies Co., Ltd.To get better services, please read this warranty card carefully, fill in the required information, and preserve this card in good condition. User Information Personal or company's full name: __________________________________________________ Address/Postal Code: ____________________________________________________________... -
Page 17: Limited Warranty
In any case that is not covered by this limited warranty or should the warranty expire, Huawei shall charge for the service(s) claimed for the products if the product is still remediable. Huawei reserves all rights to interpret this limited warranty. - Page 18 Qualification Card PASS Huawei Technologies Co., Ltd. Address: Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Web site: http://www.huawei.com...