Page 1
EchoLife HG8240/HG8245/HG8247 GPON Terminal V100R002C04&C05 Service Manual Issue Date 2011-01-26 HUAWEI TECHNOLOGIES CO., LTD.
Page 3
All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope.
About This Document Overview GPON terminal EchoLife HG8240/HG8245/HG8247 (hereafter referred to as the HG8240/ HG8245/HG8247) is an indoor optical network terminal (ONT) designed for home users and small office and home office (SOHO) users. This document provides the appearance and specifications of the HG8240/HG8245/HG8247, and describes its configuration and usage, which helps you know the HG8240/HG8245/HG8247 quickly.
Updates in Issue 02 (2011-01-26) Parts of contents are optimized. Updates in Issue 01 (2010-10-26) This is the first release for the HG8240/HG8245/HG8247 V100R002C04&C05. It is the first archive. Huawei Proprietary and Confidential Issue 02 (2011-01-26)
Page 13
Figure 2-2 Appearance of the HG8245........................2-3 Figure 2-3 Appearance of the HG8247........................2-4 Figure 2-4 Ports on the rear panel of the HG8240....................2-4 Figure 2-5 Ports on the side panel of the HG8240....................2-5 Figure 2-6 Ports on the rear panel of the HG8245....................2-6 Figure 2-7 Ports on the side panel of the HG8245....................2-7...
Page 15
Figure 4-9 Adding a T-CONT..........................4-19 Figure 4-10 Adding a GEM port........................4-20 Figure 4-11 Adding a GEM connection......................4-21 Figure 4-12 Configuring the ONT service profile (HG8240/HG8245).............4-22 Figure 4-13 Configuring the ONT service profile (HG8247)................4-23 Figure 4-14 Configuring the default VLAN ID....................4-24 Figure 4-15 Configuring the VLAN switching pair of the UNI port..............4-25...
Page 19
Tables Tables Table 2-1 Descriptions of the ports on the rear panel of the HG8240..............2-5 Table 2-2 Descriptions of the ports on the side panel of the HG8240..............2-5 Table 2-3 Descriptions of the ports on the rear panel of the HG8245..............2-6 Table 2-4 Descriptions of the ports on the side panel of the HG8245..............2-7...
This topic provides the appearance and describes the typical network applications of the HG8240/HG8245/HG8247. 2.1 Product Introduction This topic provides the appearance and describes the ports and LEDs of the HG8240/HG8245/ HG8247. 2.2 Typical Network Applications This topic describes the typical network applications of the HG8240/HG8245/HG8247.
2 System Overview Service Manual 2.1 Product Introduction This topic provides the appearance and describes the ports and LEDs of the HG8240/HG8245/ HG8247. The HG8240/HG8245/HG8247 is an indoor optical network terminal (ONT) designed for home users and small office and home office (SOHO) users. Its upper shell adopts the natural heat dissipation material, and its optical port adopts the dust-proof design with a rubber plug.
EchoLife HG8240/HG8245/HG8247 GPON Terminal 2 System Overview Service Manual Figure 2-3 Appearance of the HG8247 2.1.2 Ports This topic provides the appearance of the ports on the HG8240/HG8245/HG8247 and describes the functions of the ports. Ports on the HG8240 Figure 2-4 Figure 2-5 show the ports on the rear panel and side panel of the HG8240 respectively.
EchoLife HG8240/HG8245/HG8247 GPON Terminal Service Manual 2 System Overview Table 2-1 Descriptions of the ports on the rear panel of the HG8240 Port and Button Function Indicates the optical port. The optical port is equipped with a rubber plug and is connected to an optical fiber for upstream transmission.
(longer than RESET 10s) to restore the device to the default settings and reset the device. 2.1.3 LEDs This topic provides the appearance of the LEDs on the HG8240/HG8245/HG8247 and describes the indications of these LEDs. Figure 2-10, Figure 2-11...
EchoLife HG8240/HG8245/HG8247 GPON Terminal 2 System Overview Service Manual Table 2-7 Indications of the LEDs on the HG8240/HG8245/HG8247 Silk Screen Name Status Indication Green: always on The device is powered on. Power supply Orange: always The device is powered by the POWER backup battery.
2.2 Typical Network Applications This topic describes the typical network applications of the HG8240/HG8245/HG8247. As a network terminal, the HG8240/HG8245/HG8247 is deployed at the GPON access layer and connects home users and SOHO users to the Internet through optical upstream ports. On the local area network (LAN) side, the HG8240/HG8245/HG8247 provides abundant hardware ports to meet various network requirements of home users and SOHO users.
Service Manual Figure 2-13 Network topology of the HG8240 In the upstream direction, the HG8240 is connected to the optical splitter and the network- side OLT through the passive optical network (PON) port, namely the OPTICAL port, to provide integrated access services.
3 Configuration Guide Configuration Guide About This Chapter This topic describes how to configure the services of the HG8240/HG8245/HG8247 through the Web page. 3.1 OMCI Protocol This topic describes the principles of the OMCI protocol and how to set up an OMCI channel.
Subnet mask: 255.255.255.0 IP address and subnet mask of the PC Set the IP address of the PC to be in the same subnet as the LAN IP address of the HG8240/ HG8245/HG8247. For example: l IP address: 192.168.100.100 l Subnet mask: 255.255.255.0...
This topic describes how to log in through the Web Page. Procedure Step 1 Use a network cable to connect a LAN port of the HG8240/HG8245/HG8247 to a PC. Step 2 Ensure that the Internet Explorer of the PC does not use the proxy server. The following considers Internet Explorer 6.0 as an example to describe how to check whether the Internet Explorer uses...
This section considers the Web page for an administrator as an example. l The HG8240/HG8245/HG8247 has similar Web pages. This section considers the HG8247 as an example to describe its Web page. The HG8240 does not provide the Wi-Fi function and therefore its Web page does not have a Wi-Fi node.
Page 90
L3 Internet access service, voice service, Wi-Fi service, and TR-069 server management channel respectively. Service profile l Profile ID: 12 l Ports of the HG8240 or HG8245: – 4 Ethernet ports – 2 POTS ports l Ports of the HG8247: – 1 CATV port –...
Page 92
Set the priorities of the traffic profiles for Internet access/Wi-Fi/TR-069 server management channel and voice service to 1 and 6 respectively. The larger the value, the higher the priority. huawei(config)#traffic table ip index 8 cir 4096 priority 1 priority-policy tag-In- Packag...
Page 93
The port capability set in the ONT service profile must be the same as the actual ONT capability set. The HG8240 and HG8245 each have four ETH ports and two POTS ports. The HG8247 has one CATV port, four ETH ports, and two POTS ports.
Page 94
IDs of Internet access/Wi-Fi/TR-069 server management channel and voice service to 8 and 9 respectively. huawei(config-if-gpon-0/2)#quit huawei(config)#service-port 1 vlan 100 gpon 0/2/0 ont 0 gemport 0 multi-service user-vlan 100 inbound traffic-table index 8 outbound traffic-table index 8 huawei(config)#service-port 2 vlan 150 gpon 0/2/0 ont 0 gemport 1 multi-service...
Page 97
Wi-Fi service, and TR-069 server management channel respectively. Service profile l Name: srvprofile-gpon l Ports of the HG8240 or HG8245: – 4 Ethernet ports – 2 POTS ports l Ports of the HG8247: – 1 CATV port –...
Profile tab page, right-click and choose Add Global Profile from the shortcut menu. Parameter values vary with terminal types. Assume that the HG8240 or HG8245 is used. Set the parameters as follows: l Set Name to srvprofile-gpon. l Set Number of Pots Ports to 2.
EchoLife HG8240/HG8245/HG8247 GPON Terminal 4 Service Configuration Examples Service Manual Figure 4-12 Configuring the ONT service profile (HG8240/HG8245) Assume that the HG8247 is used. Set the parameters as follows: l Set Name to srvprofile-gpon. l Set Number of Pots Ports to 2.
The port capability set in the ONT service profile must be the same as the actual port capability set of the ONT. The HG8240 and HG8245 each has four Ethernet ports and two POTS ports. The HG8247 has one CATV port, four Ethernet ports, and two POTS ports.
Interoperation Between OLT and ONT (Through the NMS). l The procedures for configuring the HG8240, HG8247, and HG8245 are the same. This topic considers the HG8245 as an example to describe how to configure the ONT. l The following section considers the creation of an ONT VAS profile as an example to describe how to bulk configure ONTs.
In the pane on the right, configure the parameters of the SIP-based voice interface as follows: l Set Proxy Server Address below Primary Server to 172.23.1.2. l Set Home Domain to softx3000.huawei.com. l Set Digitmap to 7700xxxx. l Set Region to CN - China.
Two telephone sets are connected to TEL1 and TEL2 on the ONT respectively. Context The procedures for configuring the HG8240, HG8247, and HG8245 are the same. This topic considers the HG8245 as an example to describe how to configure the ONT.
NOTE You can configure a maximum of two users on the HG8240/HG8245/HG8247. Choose User > User 1 from the navigation tree. In the right pane, set Interface ID to 1. In the same way, choose User > User 2 from the navigation tree. In the right pane, set InterfaceID to 2.
Page 162
Figure 4-63 Configuring the telephone number of SIP voice user 1 Choose User 1 > SIP from the navigation tree. In the right pane, set Auth User Name to 88001234@softx3000.huawei.com and Auth Password to iadtest1. Figure 4-64 shows how to configure the authentication information of SIP voice user 1.
Page 163
4 Service Configuration Examples Figure 4-64 Configuring the authentication information of SIP voice user 1 In the same way, set Directory Number of User 2 to 88001235, Auth User Name to 88001235@softx3000.huawei.com, and Auth Password to iadtest2. Figure 4-65 Figure 4-66 show how to configure the telephone number and the authentication information of SIP voice user 2.
Choose InternetGatewayDevice > Services > VoiceService > 1 > VoiceProfile > 1 > SIP from the navigation tree. In the right pane, set the parameters as follows: l Set ProxyServer to softx3000.huawei.com, indicating that the address of the SIP proxy server is softx3000.huawei.com.
Page 171
Figure 4-71 Configuring the telephone number of SIP voice user 1 Choose 1 > SIP from the navigation tree. In the right pane, set AuthUserName to 88001234@softx3000.huawei.com and AuthPassword to iadtest1, indicating that the user name and password of user 1 for authentication are 88001234@softx3000.huawei.com and iadtest1 respectively.
Page 172
SIP user 2 is 88001235. Choose 2 > SIP from the navigation tree. In the right pane, set AuthUserName to 88001235@softx3000.huawei.com and AuthPassword to iadtest2, indicating that the user name and password of user 2 for authentication are 88001235@softx3000.huawei.com and iadtest2 respectively.
In the pane on the right, configure the parameters of the H.248-based voice interface as follows: l Set MGC Address below Primary Server to 172.23.1.2. l Set Register Format to DomainName and MG Domain to user.huawei.com. l Set Signaling Port Name to 1_VOIP_R_VID_200. l Set Region Settings to CN - China.
Page 183
Two telephone sets are connected to TEL1 and TEL2 on the ONT respectively. Context The procedures for configuring the HG8240, HG8247, and HG8245 are the same. This topic considers the HG8245 as an example to describe how to configure the ONT.
NOTE You can configure a maximum of two users on the HG8240/HG8245/HG8247. Choose User > User 1 from the navigation tree. In the right pane, set Interface ID to 1. In the same way, choose User > User 2 from the navigation tree. In the right pane, set InterfaceID to 2.
Step 11 Configure the MG domain name. Choose Services > Voice Service > Voice Service 1 > Interface configuration > Interface1 > H248 from the navigation tree. In the right pane, set Domain name to user.huawei.com. Figure 4-89 shows how to configure the MG domain name.
X_HW_H248 from the navigation tree. In the right pane, set the parameters as follows: l Set CallAgent1 to 172.23.1.2, indicating that the IP address of the MGC server is 172.23.1.2. l Set Domain to user.huawei.com, indicating that the MG registration address is user.huawei.com.
Verify the service. The notebook or mobile phone with the Wi-Fi function can search for the wireless signals of SSID ChinaNet-huawei. After the correct authentication key chinahuawei is entered, the Wi-Fi access service is implemented. Configuring the Wi-Fi Access Service Through the TR-069 Server This topic provides an example of how to configure the Wi-Fi access service through the TR-069 server.
TV set, telephone set, STB, PC, Wi-Fi laptop, or USB storage device. NOTE Refer to respective operations described in this section according to the type of the terminal connected to the HG8240/HG8245/HG8247. For details about the terminals that can be connected to the HG8240/ HG8245/HG8247, see 2.2 Typical Network Applications.
Service Manual 7.1 Physical Specifications This topic describes the physical specifications of the ONT, including its dimensions, weight, voltage range, and environment parameters. Table 7-1 lists the physical specifications of the HG8240/HG8245/HG8247. Table 7-1 Physical specifications Item HG8240 HG8245 HG8247...