Lan; Lan Port Work Mode; Figure 5-12 Lan Port Work Mode - Huawei HG8240 Service Manual

EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual

5.3 LAN

This topic describes how to set the working mode of the LAN port, the LAN host, and the DHCP
server through the Web page.

5.3.1 LAN Port Work Mode

5.3.2 LAN Host Configuration
5.3.3 DHCP Server Configuration
5.3.1 LAN Port Work Mode
1.

Figure 5-12 LAN Port Work Mode

Issue 04 (2011-01-12)
Parameter
Binding options
NOTE
l WAN in route mode: The ONT functions as a gateway. The IP address of the ONT can be obtained
through DHCP, Static, or PPPoE. The IP address of the PC connected to the ONT can be obtained from
the DHCP address pool of the ONT or can be set manually.
l WAN in bridge mode: The ONT functions as a relay and does not process data. The ONT does not
obtain the IP address allocated by the upper-layer device and it does not allow manual configuration
of a static IP address. The IP address of the device connected to the ONT can be obtained through
DHCP, PPPoE, or static.
l In the case of the DHCP mode, you need to set the DHCP relay. After configuration is complete,
the user-side IP address is obtained from the upper-layer device. For the detailed procedure, see
5.3.3 DHCP Server
l In the case of the PPPoE mode, the user-side IP address is obtained through PPPoE authentication
of the upper-layer device.
In the navigation tree on the left, choose LAN > LAN Port Work Mode. In the pane on
the right, determine whether the LAN port works in layer 3 mode, as shown in
5-12.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
Used to bind the WAN interface to the
LAN port or to the wireless SSID.
NOTE
Configuration.
5 Web Page Reference
Before setting the binding options, set the work
mode of the LAN port or the wireless SSID. The
binding options can be set only after the work
mode or wireless SSID is successfully set. For
details, see 5.3.1 LAN Port Work Mode
5.4.1 WI-FI Basic Configuration.
and
Figure
5-11