Configuring The Gpon Ftth Layer 2 Internet Access Service On The Olt Cli - Huawei HG8240 Service Manual

EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
Service
Classificati
on
3.3.2 Configuring the GPON FTTH Layer 2 Internet Access Service
on the OLT CLI
The OLT is connected to the remote ONT through a GPON port to provide users with the high-
speed Internet access service.
Service Requirements
l
l
l
Issue 04 (2011-01-12)
Item
NOTE
The parameters of the
SIP interface must be
the same as the
parameters on the
softswitch. SIP has
many negotiation
parameters, and the
parameters here are
mandatory.
The user PC is connected to the ONT through the LAN port in the PPPoE dialing mode.
The ONT is connected to the OLT and then to the upper-layer network in the GPON mode
to provide the high-speed Internet access service.
The high-speed Internet access service is identified by two precisely-bound VLAN tags.
On the ONT, each user is allocated with a CVLAN; on the OLT, each slot is allocated with
an SVLAN.
The high-speed Internet access service adopts a bandwidth-ensured mode with the
maximum bandwidth 100 Mbit/s as the DBA profile and performs the 4 Mbit/s rate
limitation on both the upstream and downstream directions.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Data
Port ID of the primary
softswitch to which the SIP
interface belongs: 5060
Home domain of the SIP
interface:
softx3000.huawei.com
Digitmap: x.S|x.# (Default)
l User 1:
– Phone number:
88001234
– Authentication user
name:
88001234@softx3000.
huawei.com
– Password: iadtest1
l User 2:
– Phone number:
88001235
– Authentication user
name:
88001235@softx3000.
huawei.com
– Password: iadtest2
3 Configuration
Remarks
softswitch must also
be configured.
-
-
-
3-103