Commissioning Interoperation Between The U2560 And The Ont Through The Web Page; Table 3-14 Data Plan For Commissioning Interoperation Between The U2560 And The Ont Through The Web Page - Huawei HG8240 Service Manual

3 Configuration
3.5.1.1 Commissioning Interoperation Between the U2560 and the ONT Through
the Web Page
To configure and issue ONT services using the U2560, you need to add the ONT on the U2560
so that the U2560 can manage the ONT.
Prerequisite
Before adding an ONT to the U2560, ensure that Layer 2 service channels between the OLT and
the ONT are enabled and the management traffic stream on the U2560 are created. For details,
see
OLT
Data Plan
Table 3-14
ONT through the Web page.
Table 3-14 Data plan for commissioning interoperation between the U2560 and the ONT
through the Web page
Parameter
Service type of
the WAN
interface
Connection
mode
VLAN ID of the
WAN interface
Mode of
obtaining an IP
address
ACS URL
Periodical
notification
interval
ACS user name
ACS password
3-202
3.4.1.1 Enabling Layer 2 Service Channels Between an OLT and a GPON ONT (on the
CLI).
provides the data plan for commissioning interoperation between the U2560 and the
Data
TR069
Route
50
DHCP
http://
10.11.11.1:9070
43200
hgw
hgw
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Description
When configuring the U2560 management channel,
you need to select only TR069 or a combination with
TR069. In this example, TR069 is selected.
-
The VLAN ID of the WAN interface must be the
same as the CVLAN ID configured on the OLT.
There are three modes to obtain an IP address:
l DHCP: Obtain an IP address dynamically.
l Static: Configure an IP address manually.
l PPPoE: Access in the PPPoE dialup mode.
In this example, the DHCP mode is configured. You
can also select the static or PPPoE mode according
to the data plan of the upper-layer network.
It can be the IP address, port ID, domain name of the
ACS server.
It is the default value of the system.
It is the default value of the system.
It is the default value of the system.
Service Manual
Issue 04 (2011-01-12)