Table 3-11 Data Plan - Huawei HG8240 Service Manual

3 Configuration
l
Table 3-9 Data plan
Item
OLT
ONT
Prerequisite
l
l
l
Procedure
l
3-152
The user accesses the device through GPON, and has the right to order programs from the
multicast source.
The license for the multicast program or the multicast user must already be requested and
installed.
The OLT is connected to the BRAS and the multicast source.
The VLAN of the LAN switch port connected to the OLT is the same as the upstream
VLAN of the OLT.
Configure the OLT.
1. Create a service VLAN and add an upstream port to it.
The VLAN ID is 1000, and the VLAN is a smart VLAN, Add upstream port 0/19/0
to VLAN 1000.
huawei(config)#vlan 1000 smart
huawei(config)#port vlan 1000 0/19 0
2. (Optional) Configure upstream link aggregation.
In this example, a single upstream port is used. In the case of multiple upstream ports,
upstream link aggregation can be configured. For details, see Configuring Upstream
Link Aggregation.
3. Configure GPON ONT profiles.
GPON ONT profiles include the DBA profile, line profile, service profile, and alarm
profile.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Data
Service VLAN ID: 1000
Service VLAN type: smart VLAN
Upstream port: 0/19/0
Multicast protocol: IGMP Proxy
Multicast version: IGMP V3
IP address of the multicast server: 10.10.10.10
Multicast program: 224.1.1.10
ONT IDs: 1 and 2
ID of the port on the ONT that is connected to the STB: 3
Type of the port on the ONT that is connected to the STB:
ETH
VLAN ID of the port on the ONT that is connected to the
STB: 30
Service Manual
Issue 04 (2011-01-12)