Huawei HG8240 Service Manual page 226

3 Configuration
l
Context
Some voice parameters cannot be configured on the Web page but can be configured by importing an XML
configuration file. For details about how to import an XML configuration file, see
the XML Configuration File (on the Web
Procedure
Step 1 Configure parameters of the voice WAN port.
1.
2.
3.
Step 2 Configure parameters of the SIP-based voice interface.
1.
2.
3-188
Two telephone sets must be available and each must be connected to ports TEL1 and TEL2
respectively on the ONT.
NOTE
In the navigation tree, choose WAN > WAN Configuration.
In the right pane, click New. In the dialog box that is displayed, configure parameters of
the WAN port as follows:
l WAN Connection: Enable
l Service List: VoIP (For configuring the VoIP service, VoIP or a combination containing
VoIP needs to be selected.)
l Mode: Route
l VLAN ID: 20 (The VLAN ID of the ONT must be the same as the user-side VLAN ID
configured on the OLT.)
l 802.1p: 6
l IP Acquisition Mode: DHCP
Click Apply to apply the configuration.
In the navigation tree, choose Voice > VoIP Interface Configuration.
In the right pane, configure parameters of the SIP-based voice interface as follows (other
parameters use the default settings):
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Page).
Service Manual
3.6.1 Operation Guide on
Issue 04 (2011-01-12)