Huawei HG8240 Service Manual page 232

3 Configuration
3.
Step 3 Configure parameters of the H.248-based voice users.
1.
2.
3.
4.
5.
l The terminal IDs A0 and A1 must be consistent with the corresponding configuration on the MGC.
l If Associated POTS is 1, port TEL1 on the ONT is bound. If Associated POTS is 2, port TEL2 on the ONT
3-194
Click Apply to apply the configuration.
In the navigation tree, choose Voice > VoIP User Configuration.
In the right pane, configure the parameters of voice user 1 as follows:
l Line Name: A0
l Associated POTS: 1 (binding port TEL1 on the ONT)
l Select Enable Line Name to enable the voice user configuration.
Click Apply to apply the configuration.
In the right pane, click New to add voice user 2, and configure the parameters of voice user
2 as follows:
l Line Name: A1
l Associated POTS: 2 (binding port TEL2 on the ONT)
l Select Enable Line Name to enable the voice user configuration.
Click Apply to apply the configuration.
NOTE
is bound.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
Issue 04 (2011-01-12)