Configuring The Gpon Ftth Layer 3 Bridge Multicast Service On The Olt Cli; Table 3-13 Data Plan - Huawei HG8240 Service Manual

EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
3.3.7 Configuring the GPON FTTH Layer 3 Bridge Multicast Service
on the OLT CLI
The OLT is connected to the remote ONT through a GPON port to provide users with the IPTV
service.
Service Requirements
l
l
l
l
l
Table 3-10 Data plan
Item
OLT
ONT
Prerequisite
l
l
l
Procedure
l
Issue 04 (2011-01-12)
The ONT is connected to the OLT in the Layer 3 bridge mode.
The OLT adopts IGMP proxy, a Layer 2 multicast protocol.
Multicast programs are configured statically and multicast users are authenticated.
The IGMP version of the multicast VLAN is IGMP V3.
The user accesses the device through GPON, and has the right to order programs from the
multicast source.
The license for the multicast program or the multicast user must already be requested and
installed.
The OLT is connected to the BRAS and the multicast source.
The VLAN of the LAN switch port connected to the OLT is the same as the upstream
VLAN of the OLT.
Configure the OLT.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Data
Service VLAN ID: 1000
Service VLAN type: smart VLAN
Upstream port: 0/19/0
Multicast protocol: IGMP Proxy
Multicast version: IGMP V3
Multicast forwarding packets: untag
IP address of the multicast server: 10.10.10.10
Multicast program: 224.1.1.10
ONT IDs: 1 and 2
ID of the port on the ONT that is connected to the STB: 3
Type of the port on the ONT that is connected to the STB:
ETH
VLAN ID of the port on the ONT that is connected to the
STB: 30
3 Configuration
3-159