Page 1
EchoLife HG8240/HG8245/HG8247 GPON Terminal V100R002C00&C01 Service Manual Issue Date 2011-01-12 HUAWEI TECHNOLOGIES CO., LTD.
Page 3
All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope.
About This Document Overview GPON terminal EchoLife HG8240/HG8245/HG8247 (hereafter referred to as the HG8240/ HG8245/HG8247) is an indoor optical network terminal (ONT) designed for home users and small office and home office (SOHO) users. This document provides the appearance and specifications of the HG8240/HG8245/HG8247, and describes its configuration and usage, which helps you know the HG8240/HG8245/HG8247 quickly.
Page 6
Chapters Description 2 System Overview This topic provides the appearance and describes the typical network applications of the HG8240/HG8245/HG8247. 3 Configuration This topic describes how to configure services through the NMS, the OLT CLI, the Web page or the U2560.
Updates in Issue 04 (2011-01-12) For the HG8240/HG8245/HG8247 V100R002C00&C01, this is the fourth release. The updates are as follows: The manual structure is modified and operation guides on the OLT NMS and the command line are added.
Page 9
Configuration of the NMS and the TR-069 server is added. The power consumption data of the ONT is updated. Updates in Issue 01 (2010-05-31) This is the first release for the HG8240/HG8245/HG8247 V100R002. It is the first archive. Issue 04 (2011-01-12) Huawei Proprietary and Confidential...
Page 15
Figure 2-2 Appearance of the HG8245........................2-3 Figure 2-3 Appearance of the HG8247........................2-4 Figure 2-4 Ports on the rear panel of the HG8240....................2-4 Figure 2-5 Ports on the side panel of the HG8240....................2-5 Figure 2-6 Ports on the rear panel of the HG8245....................2-6 Figure 2-7 Ports on the side panel of the HG8245....................2-7...
Page 19
Tables Tables Table 2-1 Descriptions of the ports on the rear panel of the HG8240..............2-5 Table 2-2 Descriptions of the ports on the side panel of the HG8240..............2-5 Table 2-3 Descriptions of the ports on the rear panel of the HG8245..............2-6 Table 2-4 Descriptions of the ports on the side panel of the HG8245..............2-7...
This topic provides the appearance and describes the typical network applications of the HG8240/HG8245/HG8247. 2.1 Product Introduction This topic provides the appearance and describes the ports and LEDs of the HG8240/HG8245/ HG8247. 2.2 Typical Network Applications This topic describes the typical network applications of the HG8240/HG8245/HG8247.
2 System Overview Service Manual 2.1 Product Introduction This topic provides the appearance and describes the ports and LEDs of the HG8240/HG8245/ HG8247. The HG8240/HG8245/HG8247 is an indoor optical network terminal (ONT) designed for home users and small office and home office (SOHO) users. Its upper shell adopts the natural heat dissipation material, and its optical port adopts the dust-proof design with a rubber plug.
EchoLife HG8240/HG8245/HG8247 GPON Terminal 2 System Overview Service Manual Figure 2-3 Appearance of the HG8247 2.1.2 Ports This topic provides the appearance of the ports on the HG8240/HG8245/HG8247 and describes the functions of the ports. Ports on the HG8240 Figure 2-4 Figure 2-5 show the ports on the rear panel and side panel of the HG8240 respectively.
EchoLife HG8240/HG8245/HG8247 GPON Terminal Service Manual 2 System Overview Table 2-1 Descriptions of the ports on the rear panel of the HG8240 Port and Button Function Indicates the optical port. The optical port is equipped with a rubber plug and is connected to an optical fiber for upstream transmission.
(longer than RESET 10s) to restore the device to the default settings and reset the device. 2.1.3 LEDs This topic provides the appearance of the LEDs on the HG8240/HG8245/HG8247 and describes the indications of these LEDs. Figure 2-10, Figure 2-11...
EchoLife HG8240/HG8245/HG8247 GPON Terminal 2 System Overview Service Manual Table 2-7 Indications of the LEDs on the HG8240/HG8245/HG8247 Silk Screen Name Status Indication Green: always on The device is powered on. Power supply Orange: always The device is powered by the POWER backup battery.
2.2 Typical Network Applications This topic describes the typical network applications of the HG8240/HG8245/HG8247. As a network terminal, the HG8240/HG8245/HG8247 is deployed at the GPON access layer and connects home users and SOHO users to the Internet through optical upstream ports. On the local area network (LAN) side, the HG8240/HG8245/HG8247 provides abundant hardware ports to meet various network requirements of home users and SOHO users.
Service Manual Figure 2-13 Network topology of the HG8240 In the upstream direction, the HG8240 is connected to the optical splitter and the network- side OLT through the passive optical network (PON) port, namely the OPTICAL port, to provide integrated access services.
U2560. Context NOTE l The procedures for configuring HG8240/HG8245/HG8247 are similar. The following sections consider HG8245 as an example. l The U2000 V100R002C01 is used in the following configuration examples. The screen snapshots vary with different U2000 versions but the configuration procedures are similar. For details, see the associated configuration manual.
NOTE Currently, the HG8240/HG8245/HG8247 supports only the U2560 as the TR-069 server. Therefore, the TR-069 configuration in this chapter is the U2560 configuration. The following section provides key technologies involved in these methods: ONT management and control interface (OMCI) is a protocol defined in ITU-T G.984.4.
Configuration rolls back or even factory defaults are restored if an incorrect XML configuration file is imported. When configuration parameters of an XML configuration file need to be modified, please contact Huawei technical engineers for help. 3.2 Configuring the Service by Using the NMS This topic describes how to configure Internet access service, VoIP service and IPTV service by using the NMS.
Page 54
(7) In the dialog box that is displayed, select the required NE(s), and click OK. Configure a service profile. The service profile type should be consistent with the actual ONT type. The HG8240 and HG8245 each have four ETH ports and two POTS ports. The HG8247 has four ETH ports, two POTS ports, and one CATV port.
Page 65
(7) In the dialog box that is displayed, select the required NE(s), and click OK. Configure a service profile. The service profile type should be consistent with the actual ONT type. The HG8240 and HG8245 each have four ETH ports and two POTS ports. The HG8247 has four ETH ports, two POTS ports, and one CATV port.
Page 79
(7) In the dialog box that is displayed, select the required NE(s), and click OK. Configure a service profile. The service profile type should be consistent with the actual ONT type. The HG8240 and HG8245 each have four ETH ports and two POTS ports. The HG8247 has four ETH ports, two POTS ports, and one CATV port.
Page 87
Add from the shortcut menu. NOTE A maximum of two users can be configured on the HG8240/HG8245/HG8247. Click User 1 below User and set Interface ID to 1. Click User 2 below User and set Interface ID to 2.
Page 95
(7) In the dialog box that is displayed, select the required NE(s), and click OK. Configure a service profile. The service profile type should be consistent with the actual ONT type. The HG8240 and HG8245 each have four ETH ports and two POTS ports. The HG8247 has four ETH ports, two POTS ports, and one CATV port.
Page 103
Add from the shortcut menu. NOTE A maximum of two users can be configured on the HG8240/HG8245/HG8247. Click User 1 below User and set Interface ID to 1. Click User 2 below User and set Interface ID to 2.
Page 111
(7) In the dialog box that is displayed, select the required NE(s), and click OK. Configure a service profile. The service profile type should be consistent with the actual ONT type. The HG8240 and HG8245 each have four ETH ports and two POTS ports. The HG8247 has four ETH ports, two POTS ports, and one CATV port.
Page 126
(7) In the dialog box that is displayed, select the required NE(s), and click OK. Configure a service profile. The service profile type should be consistent with the actual ONT type. The HG8240 and HG8245 each have four ETH ports and two POTS ports. The HG8247 has four ETH ports, two POTS ports, and one CATV port.
Page 143
The service profile type should be consistent with the actual ONT type. The HG8240 and HG8245 each have four ETH ports and two POTS ports. The HG8247 has four ETH ports, two POTS ports, and one CATV port. The ID of the VLAN to which ETH port 1 belongs is 10.
Page 144
If the password or SN of an ONT is obtained, you can run the ont add command to add the ONT offline. huawei(config)#interface gpon 0/1 huawei(config-if-gpon-0/1)#ont add 1 1 sn-auth 6877687714852900 omci ont-lineprofile-id 10 ont-srvprofile-id 10 desc HG8245 huawei(config-if-gpon-0/1)#ont add 1 2 sn-auth 6877687714852901 omci ont-lineprofile-id 10 ont-srvprofile-id 10 desc HG8245 (2) Automatically find an ONT.
Page 145
ONTs in batches to simplify the operation and increase the configuration efficiency. For example, the preceding command can be modified as follows: huawei(config-if-gpon-0/1)#ont confirm 1 all sn-auth omci ont- lineprofile-id 10 ont-srvprofile-id 10 (3) (Optional) Bind an alarm profile to the ONT.
Page 146
Configure the mapping between queues and 802.1p priorities. Priorities 0-7 map queues 0-7 respectively. huawei(config)#cos-queue-map cos0 0 cos1 1 cos2 2 cos3 3 cos4 4 cos5 5 cos6 6 cos7 7 For the service board that supports only four queues, the mapping between 802.1p priorities and queue IDs is as follows: priorities 0 and 1 map queue 1;...
Page 149
(3) Configure an ONT service profile. The service profile type should be consistent with the actual ONT type. The HG8240 and HG8245 each have four ETH ports and two POTS ports. The HG8247 has four ETH ports, two POTS ports, and one CATV port.
Page 150
If the password or SN of an ONT is obtained, you can run the ont add command to add the ONT offline. huawei(config)#interface gpon 0/1 huawei(config-if-gpon-0/1)#ont add 1 1 sn-auth 6877687714852900 omci ont-lineprofile-id 10 ont-srvprofile-id 10 desc HG8245 huawei(config-if-gpon-0/1)#ont add 1 2 sn-auth 6877687714852901 omci ont-lineprofile-id 10 ont-srvprofile-id 10 desc HG8245 (2) Automatically find an ONT.
Page 151
ONTs in batches to simplify the operation and increase the configuration efficiency. For example, the preceding command can be modified as follows: huawei(config-if-gpon-0/1)#ont confirm 1 all sn-auth omci ont- lineprofile-id 10 ont-srvprofile-id 10 (3) (Optional) Bind an alarm profile to the ONT.
Page 152
Set the service port indexes to 1 and 2, SVLAN ID to 100, GEM port ID to 1, and CVLAN ID to 10. Use traffic profile 8. huawei(config)#service-port 1 vlan 100 gpon 0/1/1 ont 1 gemport 1 multi- service user-vlan 10 rx-cttr 8 tx-cttr 8...
Page 153
EchoLife HG8240/HG8245/HG8247 GPON Terminal Service Manual 3 Configuration huawei(config)#cos-queue-map cos0 0 cos1 1 cos2 2 cos3 3 cos4 4 cos5 5 cos6 6 cos7 7 For the service board that supports only four queues, the mapping between 802.1p priorities and queue IDs is as follows: priorities 0 and 1 map queue 1; priorities 2 and 3 map queue 2;...
Page 161
(3) Configure an ONT service profile. The service profile type must be the same as the actual ONT type. The HG8240 and HG8245 each have four ETH ports and two POTS ports. The HG8247 has four ETH ports, two POTS ports, and one CATV port.
Page 162
If the password or SN of an ONT is obtained, you can run the ont add command to add the ONT offline. huawei(config)#interface gpon 0/1 huawei(config-if-gpon-0/1)#ont add 1 1 sn-auth 6877687714852900 omci ont-lineprofile-id 10 ont-srvprofile-id 10 desc HG8245 huawei(config-if-gpon-0/1)#ont add 1 2 sn-auth 6877687714852901 omci ont-lineprofile-id 10 ont-srvprofile-id 10 desc HG8245 (2) Automatically find an ONT.
Page 163
EchoLife HG8240/HG8245/HG8247 GPON Terminal Service Manual 3 Configuration huawei(config-if-gpon-0/1)#ont alarm-profile 1 1 profile-id 1 huawei(config-if-gpon-0/1)#ont alarm-profile 1 2 profile-id 1 Confirm that the ONT goes online normally. After an ONT is added, run the display ont info command to query the current status of the ONT.
Page 164
Configure the mapping between queues and 802.1p priorities. Priorities 0-7 map queues 0-7 respectively. huawei(config)#cos-queue-map cos0 0 cos1 1 cos2 2 cos3 3 cos4 4 cos5 5 cos6 6 cos7 7 For the service board that supports only four queues, the mapping between 802.1p priorities and queue IDs is as follows: priorities 0 and 1 map queue 1;...
Page 166
MGC type. Profile Index is set to Default (indicating interconnection with Huawei MGC) in this example. If the settings do not meet requirements, configure UserDefine. For details about how to configure this parameter, contact Huawei technical support.
Page 171
Add from the shortcut menu. NOTE A maximum of two users can be configured on the HG8240/HG8245/HG8247. Click User 1 below User and set Interface ID to 1. Click User 2 below User and set Interface ID to 2.
Page 176
DBA profile. Set the DBA profile ID to 20, type to Type3, assured bandwidth to 15 Mbit/s, and maximum bandwidth to 30 Mbit/s. huawei(config)#dba-profile add profile-id 20 type3 assure 15360 max 30720 (2) Configure an ONT line profile.
Page 177
3 Configuration (3) Configure an ONT service profile. The service profile type must be the same as the actual ONT type. The HG8240 and HG8245 each have four ETH ports and two POTS ports. The HG8247 has four ETH ports, two POTS ports, and one CATV port.
Page 178
ONTs in batches to simplify the operation and increase the configuration efficiency. For example, the preceding command can be modified as follows: huawei(config-if-gpon-0/1)#ont confirm 1 all sn-auth omci ont- lineprofile-id 10 ont-srvprofile-id 10 (3) (Optional) Bind an alarm profile to the ONT.
Page 179
Set the service port indexes to 3 and 4, SVLAN ID to 200, GEM port ID to 2, and CVLAN ID to 20. Use traffic profile 9. huawei(config-if-gpon-0/1)#quit huawei(config)#service-port 3 vlan 200 gpon 0/1/1 ont 1 gemport 2 multi- service user-vlan 20 rx-cttr 9 tx-cttr 9 huawei(config)#service-port 4 vlan 200 gpon 0/1/1 ont 2 gemport 2 multi- service user-vlan 20 rx-cttr 9 tx-cttr 9 Configure the queue scheduling mode.
Page 180
Configure the mapping between queues and 802.1p priorities. Priorities 0-7 map queues 0-7 respectively. huawei(config)#cos-queue-map cos0 0 cos1 1 cos2 2 cos3 3 cos4 4 cos5 5 cos6 6 cos7 7 For the service board that supports only four queues, the mapping between 802.1p priorities and queue IDs is as follows: priorities 0 and 1 map queue 1;...
Page 187
Add from the shortcut menu. NOTE A maximum of two users can be configured on the HG8240/HG8245/HG8247. Click User 1 below User and set Interface ID to 1. Click User 2 below User and set Interface ID to 2.
Page 191
(3) Configure an ONT service profile. The service profile type must be the same as the actual ONT type. The HG8240 and HG8245 each have four ETH ports and two POTS ports. The HG8247 has four ETH ports, two POTS ports, and one CATV port. Set the VLAN ID of ETH port 3 to 30.
Page 192
If the password or SN of an ONT is obtained, you can run the ont add command to add the ONT offline. huawei(config)#interface gpon 0/1 huawei(config-if-gpon-0/1)#ont add 1 1 sn-auth 6877687714852900 omci ont-lineprofile-id 10 ont-srvprofile-id 10 desc HG8245 huawei(config-if-gpon-0/1)#ont add 1 2 sn-auth 6877687714852901 omci ont-lineprofile-id 10 ont-srvprofile-id 10 desc HG8245 (2) Automatically find an ONT.
Page 193
ONTs in batches to simplify the operation and increase the configuration efficiency. For example, the preceding command can be modified as follows: huawei(config-if-gpon-0/1)#ont confirm 1 all sn-auth omci ont- lineprofile-id 10 ont-srvprofile-id 10 (3) (Optional) Bind an alarm profile to the ONT.
Page 194
Set the service port indexes to 5 and 6, SVLAN ID to 1000, GEM port ID to 3, and CVLAN ID to 30. Use traffic profile 10. huawei(config)#service-port 5 vlan 1000 gpon 0/1/1 ont 1 gemport 3 multi- service user-vlan 30 rx-cttr 10 tx-cttr 10...
Page 195
EchoLife HG8240/HG8245/HG8247 GPON Terminal Service Manual 3 Configuration huawei(config)#cos-queue-map cos0 0 cos1 1 cos2 2 cos3 3 cos4 4 cos5 5 cos6 6 cos7 7 For the service board that supports only four queues, the mapping between 802.1p priorities and queue IDs is as follows: priorities 0 and 1 map queue 1; priorities 2 and 3 map queue 2;...
Page 198
DBA profile. Set the DBA profile ID to 30, type to type4, and maximum bandwidth to 60 Mbit/ huawei(config)#dba-profile add profile-id 30 type4 max 61440 (2) Configure an ONT line profile. Create GPON ONT line profile 10 and bind T-CONT 3 to DBA profile 30.
Page 199
(3) Configure an ONT service profile. The service profile type must be the same as the actual ONT type. The HG8240 and HG8245 each have four ETH ports and two POTS ports. The HG8247 has four ETH ports, two POTS ports, and one CATV port. The multicast packets forwarded by the ONT do not carry VLAN tags.
Page 200
ONTs in batches to simplify the operation and increase the configuration efficiency. For example, the preceding command can be modified as follows: huawei(config-if-gpon-0/1)#ont confirm 1 all sn-auth omci ont- lineprofile-id 10 ont-srvprofile-id 10 (3) (Optional) Bind an alarm profile to the ONT.
Page 201
Set the service port indexes to 5 and 6, SVLAN ID to 1000, GEM port ID to 3, and CVLAN ID to 30. Use traffic profile 10. huawei(config)#service-port 5 vlan 1000 gpon 0/1/1 ont 1 gemport 3 multi- service user-vlan 30 rx-cttr 10 tx-cttr 10...
Page 202
Configure the mapping between queues and 802.1p priorities. Priorities 0-7 map queues 0-7 respectively. huawei(config)#cos-queue-map cos0 0 cos1 1 cos2 2 cos3 3 cos4 4 cos5 5 cos6 6 cos7 7 For the service board that supports only four queues, the mapping between 802.1p priorities and queue IDs is as follows: priorities 0 and 1 map queue 1;...
Page 203
Configure users of service ports 5 and 6 as multicast users and bind right profile profile0 to the service ports. huawei(config-btv)#igmp policy service-port 5 normal huawei(config-btv)#igmp policy service-port 6 normal huawei(config-btv)#igmp user add service-port 5 auth huawei(config-btv)#igmp user add service-port 6 auth huawei(config-btv)#igmp user bind-profile service-port 5 profile-name profile0...
Page 213
U2560 management channel: Set the DBA profile ID to 40, type to Type2, assured bandwidth to 15 Mbit/s. huawei(config)#dba-profile add profile-id 10 type4 max 102400 huawei(config)#dba-profile add profile-id 20 type3 assure 30720 max 102400 huawei(config)#dba-profile add profile-id 30 type4 max 204800 huawei(config)#dba-profile add profile-id 40 type2 assure 30720 Configure an ONT line profile.
Page 214
Configure an ONT service profile. The service profile type should be consistent with the actual ONT type. The HG8240 and HG8245 each have four ETH ports and two POTS ports. The HG8247 has four ETH ports, two POTS ports, and one CATV port. The ID of the VLAN to which ETH port 1 belongs is 10.
Page 215
If the password or SN of an ONT is obtained, you can run the ont add command to add the ONT offline. huawei(config)#interface gpon 0/1 huawei(config-if-gpon-0/1)#ont add 1 1 sn-auth 6877687714852900 omci ont- lineprofile-id 10 ont-srvprofile-id 10 desc HG8245 huawei(config-if-gpon-0/1)#ont add 1 2 sn-auth 6877687714852901 omci ont- lineprofile-id 10 ont-srvprofile-id 10 desc HG8245 Automatically find an ONT.
Page 217
7, and packets are scheduled according to the priority carried. huawei(config-if-gpon-0/1)#quit huawei(config)#traffic table ip index 8 cir 4096 priority 1 priority-policy tag-In- Package huawei(config)#traffic table ip index 9 cir off priority 6 priority-policy tag-In- Package...
Page 218
Configure the mapping between queues and 802.1p priorities. Priorities 0-7 map queues 0-7 respectively. huawei(config)#cos-queue-map cos0 0 cos1 1 cos2 2 cos3 3 cos4 4 cos5 5 cos6 6 cos7 For the service board that supports only four queues, the mapping between 802.1p priorities and queue IDs is as follows: priorities 0 and 1 map queue 1;...
Subnet mask: 255.255.255.0 Procedure Step 1 Use a network cable to connect the LAN port of the HG8240/HG8245/HG8247 to a PC. Step 2 Ensure that the Internet Explorer (IE) of the PC does not use the proxy server. The following section considers IE 6.0 as an example to describe how to check whether the IE uses the proxy...
Page 231
Profile Index can be set to Default, BT, FT, KPN, PCCW, ZTE, or BELL. Choose the value based on the MGC type. Profile Index is set to Default (indicating interconnection with Huawei MGC) in this example. If the settings do not meet requirements, configure UserDefine. For details about how to configure this parameter, contact Huawei technical support.
Page 252
Choose InternetGatewayDevice > Services > VoiceService > 1 > VoiceProfile > 1 > SIP from the navigation tree. In the right pane, set the parameters as follows: l Set ProxyServer to softx3000.huawei.com, indicating that the address of the SIP proxy server is softx3000.huawei.com.
Page 254
3 Configuration Service Manual Choose 1 > SIP from the navigation tree. In the right pane, set AuthUserName to 88001234@softx3000.huawei.com and AuthPassword to iadtest1, indicating that the user name and password of user 1 for authentication are 88001234@softx3000.huawei.com and iadtest1 respectively.
Page 255
SIP user 2 is 88001235. Choose 2 > SIP from the navigation tree. In the right pane, set AuthUserName to 88001235@softx3000.huawei.com and AuthPassword to iadtest2, indicating that the user name and password of user 2 for authentication are 88001235@softx3000.huawei.com and iadtest2 respectively.
Configuration rolls back or even factory defaults are restored if an incorrect XML configuration file is imported. When configuration parameters of an XML configuration file need to be modified, please contact Huawei technical engineers for help. 3.6.1 Operation Guide on the XML Configuration File (on the Web Page) This topic describes how to issue the XML configuration file on the Web page.
Configuration will roll back or even factory defaults are restored if an incorrect XML configuration file is issued. When configuration parameters need to be modified for an XML configuration file, please contact Huawei technical engineers for help. Save the modified XML configuration file.
Page 274
Configuration will roll back or even factory defaults are restored if an incorrect XML configuration file is issued. When configuration parameters need to be modified for an XML configuration file, please contact Huawei technical engineers for help. (3) Save the modified XML configuration file.
Configuration will roll back or even factory defaults are restored if an incorrect XML configuration file is issued. When configuration parameters need to be modified for an XML configuration file, please contact Huawei technical engineers for help. (3) Save the modified XML configuration file.
Page 306
ETH port. ----End Example To query the performance statistics of ETH port 1 on ONT 1 that is connected to GPON port 0/2/0, do as follows: huawei(config-if-gpon-0/2)#display statistics ont-eth 0 1 ont-port 1 ----------------------------------------------------------------------- Received frames 98 100% Received unicast frames...
Locally Logging in to the Web Interface. The Web page configurations of the HG8240/HG8245/HG8247 and the HG8240 are similar but the HG8240's Web page does not contain the Wi-Fi node. Because different software versions support different voice protocols, the Voice node contains different parameters.
Page 344
RTP TID Prefix Indicates the prefix of the ephemeral termination. The default prefix on Huawei softswitches is A100. Start Number of RTP Indicates the start number of the suffix of the ephemeral termination. The default value is 0.
Service Manual 6.1 Physical Specifications This topic describes the physical specifications of the ONT, including its dimensions, weight, voltage range, and environment parameters. Table 6-1 lists the physical specifications of the HG8240/HG8245/HG8247. Table 6-1 Physical specifications Item HG8240 HG8245 HG8247...