Huawei HG8240 Service Manual page 56

3 Configuration
3-18
– In the dialog box that is displayed, right-click and choose Add, and
configure the parameters of VLAN switch.
– Service Type: Translation
– S-VLAN: 30 (Multicast user-side VLAN ID)
– C-VLAN: 30 (Multicast user-side VLAN ID)
(5) Click OK.
(6) In the information list, right-click the record and choose Download to NE from
the shortcut menu.
(7) In the dialog box that is displayed, select the required NE(s), and click OK.
5. Confirm the ONT.
(1) In the Main Topology, double-click the required OLT in the Physical Root
navigation tree; or right-click the required OLT and choose NE Explorer from
the shortcut menu.
(2) Choose GPON > GPON UNI Port from the navigation tree.
(3) On the GPON UNI Port tab page, set the filter criteria to display the required
GPON UNI ports.
(4) In the information list, right-click GPON UNI port 0/2/1 and choose Enable
ONU Auto Find from the shortcut menu.
(5) Click the Auto-Discovered ONU Info tab in the lower pane, right-click the ONU
with SN 32303131B39FD641, and then choose Confirm ONU from the shortcut
menu.
– Name: ONT
– ONU ID: 0
– ONU Type: ONT
– On the Basic Parameters tab page, set the parameters.
– Line Profile: FTTx (click
named FTTx in the dialog box that is displayed)
– Service Profile: FTTx (click
service profile named FTTx in the dialog box that is displayed)
– Authentication Mode: SN
– Terminal Type: 245
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
EchoLife HG8240/HG8245/HG8247 GPON Terminal
next to Line Profile and select the line profile
next to Service Profile and select the
Service Manual
Issue 04 (2011-01-12)