Configuring Gpon Ftth Layer 3 Internet Access Service On The Nms - Huawei HG8240 Service Manual

EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
----End
Result
Check whether the user successfully gains access to the Internet through dialup on the PC.
1.
2.
3.
3.2.3 Configuring GPON FTTH Layer 3 Internet Access Service on
the NMS
This topic describes how to configure the high-speed Internet service when an ONT is connected
to an OLT through a GPON port.
Context
For details of the data plan, see Data Plan.
Example Network
l
l
l
Issue 04 (2011-01-12)
– Upstream Traffic Name: ip-traffic-table_6 (it is recommended that you use
the default profile ip-traffic-table_6 because the OLT does not limit the rates
of service streams in the management VLAN)
(4) Click OK.
The LAN port of the ONT is connected to the Ethernet port of the PC properly.
Dial up on the PC using the PPPoE dialup software.
The user gains access to the Internet on the PC after the dialup is successful.
Users' PCs are connected to the ONT using the LAN ports. IP addresses of users' PCs are
allocated by the DHCP IP address pool on the ONT. PPPoE auto dialup is performed on
the ONT.
The ONT is connected to the GPBC card of the OLT through an optical fiber.
The broadband remote access server (BRAS) provides the authentication, authorization,
and accounting (AAA) functions.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Configuration
3-21