WA635SN-GN Wireless LAN Access Point Quick Start Guide HUAWEI TECHNOLOGIES CO., LTD.
Page 2
Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope.
Page 3
Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Indicates a potentially hazardous situation, which if not avoided, could CAUTION result in equipment damage, data loss, performance degradation, or unexpected results. Provides additional information to emphasize or supplement important NOTE points of the main text.
WA635SN-GN Quick Start Guide Please download the detailed product documents from "http://support.huawei.com/support/". The detailed path is as follows: Technical Support->Documentation->Wireless->Wireless WLAN->Wireless WLAN AP->Product Documentation->WA635SN. Before performing Installation, confirm that the installation accessories and tools are available. Technical Support Installation accessories: Installation tools: Huawei Technologies Co., Ltd.
WA635SN-GN dimensions (unit: mm) without a backplane Recommended WA635SN-GN installation space (unit: mm) support The WA635SN-GN can be installed using a wall-mounting template (for wall-mounting installation) or wall-mounting bracket (for wall-mounting or ceiling-mounting installation). To wall-mount the device using a wall-mounting template, perform the following operations: 2.
Page 6
Installing the AP To wall-mount the device using a wall-mounting bracket, perform the following operations: 1) Attach the wall-mounting bracket to the wall, adjust 2) Use #6 drill bit to drill 25-30 mm deep holes in the drilling the installation position, and use the marker, level, and positions.
Page 7
Installing the AP Ceiling mount the AP: 1. Fix a clip holder at the rear side of the AP with two M3*6 screws. The wall-mounting bracket is fixed at the ceiling, and the AP is hung on the bracket. The clip holder prevents the AP from dropping. 2.
Page 8
Require FCC certification, use W5030H antennas from Pulse. Name Description The M4 connector is connected to the WA635SN-GN and the M6 connector is connected to Ground cable the ground bar. Power ● The WA635SN-GN supports PoE power supply and DC power supply.
2s green The indicator blinks more quickly when more data is being transmitted. CAUTION The WA635SN-GN cannot be powered by a PoE power supply and a power adapter at the same time. Technical Specifications Item Description Weight 600g...
Page 10
Logging In to the Router After an AP is powered on, you can log in to the AP using the following methods. 1. Logging In to the AP Through the Console Port This section describes how to log in to the AP through the console port. After logging in to the AP, you can configure the AP using commands.
Page 11
Logging In to the Router Step 3 Select the serial port used on the PC and click OK, as shown in Figure 1-3. Figure 1-3 Selecting the connected port Step 4 Click Restore Defaults, select 9600 bit/s from the Bits per second drop-down list box, and click OK, as shown in Figure 1-4.
Page 12
Logging In to the Router 2. Logging In to the AP Using Telnet This section describes how to log in to the AP using Telnet. After logging in to the AP, you can configure the AP using Commands. Procedure Step 1 Connect a PC to the uplink port of the AP with a network cable.
Page 13
AP Local Configuration WLAN services parameters of an AP are configured on the AC that is connected To the AP, and then delivered to the AP. The following parameters are configured on the AP through Telnet or the console port. 1.
Page 14
Enterprise AP (if-ethernet) # 3. Configure a user name and password for going online in PPPoE mode. By default, the user name and password are both wlan@huawei and the password type is simple. Enterprise AP (if-ethernet) # user admin password simple admin //Set the user name and password to admin.
Page 15
Declaration on Hazardous Substances in Electronic Information Products Hazardous Substances Part Cr6+ PBDE Mechanical part Board/circuit module Signal cable Cable connector Power adapter Auxiliary equipment O:Indicates that the concentration of the hazardous substance contained in all the homogeneous materials of this part is below the limit requirement of the SJ/T 11363-2006 standard.
Page 16
In any of the following cases, the warranty card becomes unenforceable or inapplicable without prior notice: 1. The defects are caused by improper handling in transportation and assembly. 2. The defects are caused by the fact that the product is dismantled or altered by anyone that is not from a Huawei authorized service partner.