Configuring Dedicates Bearers; Remote Configuration (Auto-Configuration) - Huawei EG860 Series User Manual

EG860
User Guide

5.1.4 Configuring Dedicates Bearers

This section describes how to configure dedicated bearers.
To ensure the service performance, configure dedicated bearers based on specific service and
planning.
For data configuration on the EG860 side, see
For data configuration on the side of other NEs, see the QoS Feature Manual.

5.2 Remote Configuration (Auto-configuration)

EG860 supports the auto-configuration function. Auto-configuration deployment operations can
be performed to EG860 on the NMS system.
Prerequisites
l
l
l
Context
Procedure
The flowchart of remotely auto-configurable commissioning for EG860 using the eOMC910 is
shown as
Issue 02 (2015-04-10)
An EG860 has been properly mounted.
After being powered on, the EG860 operates normally based on default configuration
parameters.
The EG860 is registered to the network and can be managed by the eOMC910.
NOTE
Security control must be implemented because uncertainties exist in the environments where remote
terminals are located. Users are advised to provide remote access as required. Locally accessing EG860
has fewer risks.
Figure 5-2. See
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7.2.9 Dedicated
Table 5-10 for details.
5 Configuration
Context.
73