Huawei HG8240 Service Manual page 165

EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
Issue 04 (2011-01-12)
(1) In the navigation tree, choose WAN > WAN Configuration.
(2) In the right pane, click New. In the dialog box that is displayed, configure
parameters of the WAN port as follows:
– WAN Connection: Enable
– Service List: VoIP (For configuring the VoIP service, VoIP or a combination
containing VoIP needs to be selected.)
– Mode: Route
– VLAN ID: 20 (The VLAN ID of the ONT must be the same as the user-side
VLAN ID configured on the OLT.)
– 802.1p: 6
– IP Acquisition Mode: DHCP
(3) Click Apply to apply the configuration.
3. Configure the parameters of the H.248-based voice interface.
(1) In the navigation tree, choose Voice > VoIP Interface Configuration.
(2) In the right pane, configure the parameters of the H.248-based voice interface as
follows (other parameters use the default settings):
– Set MGC Address below Primary Server to 200.200.200.200.
– MID Format: DomainName
– MG Domain: 6877687714852901
– Signaling Port: 1_VOIP_R_VID_20
– Region: CN – China
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Configuration
3-127