Firmware Upgrade; Ont Authentication; Figure 5-39 Firmware Upgrade; Figure 5-40 Ont Authentication - Huawei HG8240 Service Manual

5 Web Page Reference

5.10.6 Firmware Upgrade

1.

Figure 5-39 Firmware Upgrade

2.

5.10.7 ONT Authentication

1.

Figure 5-40 ONT Authentication

5-42
the configuration file that is saved in the local disk. After the configuration file is
successfully uploaded, the device automatically restarts and then the new configuration
takes effect.
CAUTION
Before uploading the configuration file, choose the configuration file with the correct type
and the name of the selected configuration file must not be the same as that of any file saved
in the device. Otherwise, the configuration file fails to be uploaded.
In the navigation tree on the left, choose System Tools > Firmware Upgrade. In the pane
on the right, click Browse. In the dialog box that is displayed, select the target software
version of the device. Click Update Firmware to upgrade the software of the device, as
shown in Figure 5-39.
After the upgrade is successful, a message is displayed indicating that the device needs to
be reset. Click Reset. The configuration data takes effect after the device is reset.
In the navigation tree on the left, choose System Tools > ONT Authentication. In the pane
on the right, you can view or change the authentication mode for the registration of the
ONT on the OLT, as shown in
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Figure 5-40.
Service Manual
Issue 04 (2011-01-12)