Huawei HG8240 Service Manual page 344

5 Web Page Reference
5-36
Parameter
MG Domain
MG Port
Device Name
MID Format
Digitmap Match Mode
RTP TID Prefix
Start Number of RTP
TID
Width of RTP TID
Number
Signaling Port
Media Port
Region
Advanced Interface configuration
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Description
Fill the domain name when Register Format is set to
DomainName, such as user.huawei.com.
Indicates the ID of the local port on the ONT. The ID ranges
from 1 to 65535 and the default ID is 2944.
Fill the device name when Register Format is set to
DeviceName.
Indicates the MG registration format. It can be the MG
domain name, IP address, or device name. The MG register
format must be the same as the register format provided by
the ISP.
Indicates the digitmap matching mode, including Min and
Max.
l Min: If the dialed character string matches a digitmap
scheme, the system immediately reports the number to
the softswitches.
l Max: If the dialed character string matches a digitmap
scheme, the system does not immediately report the
number to the softswitches but starts the short timer. If a
user does not continue dialing digits, the system reports
the number to the softswitches after the short timer times
out; if the user continues dialing digits and the number
matches the long digitmap, the system reports the number
that matches the digitmap to the softswitches.
Indicates the prefix of the ephemeral termination. The default
prefix on Huawei softswitches is A100.
Indicates the start number of the suffix of the ephemeral
termination. The default value is 0.
Indicates the length of the suffix of the ephemeral
termination. The default value is 6.
Indicates the signaling WAN port used for connecting the
VoIP terminal to the MGC server.
Indicates the WAN port of the voice media streams. When
the name of the media port is empty, it indicates that the name
of the media port is the same as that of the signaling port.
Indicates the country code.
Service Manual
Issue 04 (2011-01-12)