Huawei HG8240 Service Manual page 97

EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
l
Issue 04 (2011-01-12)
– Service Profile: FTTx (click
service profile named FTTx in the dialog box that is displayed)
– Authentication Mode: SN
– Terminal Type: 245
– Software Version: V1R002C00 (or V1R002C01)
(6) Click OK.
Configure the voice service.
The prerequisite for performing operations in the navigation tree is to navigate to the NE
Explorer of the OLT. To navigate to the NE Explorer of the OLT, do as follows: In the
Main Topology, double-click the required OLT in the Physical Root navigation tree; or
right-click the required OLT and choose NE Explorer from the shortcut menu.
NOTE
Some voice parameters cannot be configured on the NMS but can be configured by importing an XML
configuration file. For details about how to import an XML configuration file, see
on the XML Configuration File (on the
1. Configure a service VLAN on the OLT side.
A service VLAN is the VLAN used for the voice service.
(1) Choose VLAN from the navigation tree.
(2) On the VLAN tab page, right-click and choose Add from the shortcut menu.
(3) In the dialog box that is displayed, set the parameters.
– VLAN ID: 200
– Type: Smart VLAN
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
next to Service Profile and select the
U2000).
3 Configuration
3.6.2 Operation Guide
3-59