Reduction/Enlargement/Zoom - Sharp AR-153E N Operation Manual

REDUCTION/ENLARGEMENT/ZOOM

Three preset reduction ratios and two enlargement ratios can be selected. The zoom
function enables copy ratio selection from 25% to 400% in 1% increments.
1
Set the original and check the paper size.
2
Use the copy ratio selector key and/or ZOOM (
select the desired copy ratio.
3
Set the reduction/enlargement ratio.
To select a preset copy ratio:
Preset reduction and enlargement ratios are:
25%, 70%, 86%, 141%, and 400%.
To select a zoom ratio:
When a ZOOM (
ZOOM indicator will light up and the zoom ratio will
be displayed in the display.
Selecting the tray
Press the tray select
Each time you press the tray select (
location indicated by the paper feed location
indicator changes in the following order: paper tray
1, paper tray 2 if installed, multi-bypass tray.
20
Downloaded from:
• To verify a zoom setting without changing the zoom ratio,
press and hold down the copy ratio display (%) key. When the
key is released, the display will return to the copy quantity
display.
• To reset the ratio to 100%, press the copy ratio selector key
repeatedly until the 100% indicator lights up.
To decrease or increase the zoom ratio rapidly, press and hold
down the ZOOM (
stop at the preset reduction or enlargement ratios. To move
beyond these ratios, release the key and then press and hold it
down again.
(
http://www.usersmanualguide.com/
) or ( ) key. However the value will
or ) key is pressed, the
key.
)
) key, the
, ) keys to
A5 A4
141
A4 B5
86
A4 A5
70
AR-153E N
A5 A4
141
A4 B5
86
A4 A5
70