Pitney Bowes DP50S Hardware Manual page 85

About two seconds later, the display returns to the [Paper Input] screen.
9. Press the [Menu] key.
The display returns to the initial screen.
• Make sure paper is not stacked higher than the paper guides inside the bypass tray.
• Be sure to select the appropriate paper type when you load labels, thick paper, envelopes, or
OHP transparencies in the bypass tray.
Setting custom size paper
• When printing on custom size paper, specify the paper size using the control panel or printer driver.
• The custom size paper selected using the printer driver overrides that selected using the control
panel. Do not configure settings using the control panel if you have already configured settings
using the printer driver. However, when printing with a printer driver other than the RPCS printer
driver, you must configure the settings using the control panel.
• The following is the range of paper size that can be set as custom size: 90 to 305 mm (3.55 to 12
inches) in width and 148 to 1260 mm (5.83 to 49.60 inches) in length.
• The printer cannot print to custom size paper from applications that do not support custom size paper.
1. Press the [Menu] key.
2. Press the [ ] or [ ] key to select [Paper Input], and then press the [OK] key.
BMW028S
Loading Paper
5
83