Pitney Bowes DP50S Hardware Manual page 102

6. Replacing Consumables
13. Pushing the front of the drum unit, fully insert it into the printer.
14. Lower the handle located on the front of the drum unit, and push it until it clicks into place.
6
15. Holding the drum unit firmly in place, pull out the tape.
• Remember to pull out the tape. Malfunctions occur if you attempt to print while the tape is
still attached.
• The removed tape is dirty. Be careful not to let it touch your hands or clothes.
16. When replacing a color drum unit, replace the three color units together using the same
procedure, before closing the inner cover.
100
BMV073S
BMV074S
BMV075S