Pitney Bowes DP50S Hardware Manual page 144

9. Troubleshooting
Replace PCU:Black soon. A new PCU is required. Contact your local vendor.
You will need to replace the black drum unit soon. Contact your sales or service representative to
obtain a new unit.
Replace PCU:Color.
You need to replace the color drum units. See p.143 "Replacing the Black Drum Unit/Color Drum Units".
Replace PCU:Color soon. A new PCU is required. Contact your local vendor
You will need to replace the color drum units soon. Contact your sales or service representative to obtain a
new unit.
Reset Paper Tray correctly. A4
The paper tray is not set correctly. Set the indicated tray again, or select a different tray to print from.
SD Card authenticatn.failed Error recurs, call service
Authentication from the SD card failed. Turn the power off, and then back on. If the error recurs,
contact your sales or service representative.
Set the Fusing Unit correctly.
The fusing unit is not set correctly. Set the fusing unit again.
Set the Intermediate Transfer Unit correctly.
The transfer unit is not set correctly. Set the transfer unit again.
Set the Toner Cartridge correctly.
The indicated toner cartridge is not set correctly. Set the indicated toner cartridge again.
9
Set Tray to below setting or [Cancel] to FormFeed. A4
A size and paper type mismatch has occurred with Auto tray select mode set. Set the tray to the indicated size
and paper type, press [Job Reset] to reset the job, or press [FormFeed] to force printing.
Set Waste Toner Bottle correctly.
The waste toner bottle is not set correctly. Set the waste toner bottle again.
SRAM problem occurred. SRAM was formatted.
There was an error in the SRAM.
Standard Tray is full. Remove the paper.
The standard output tray is full, or there is a problem with the paper tray motor. Remove the paper
from the tray.
142
(Recycled)
(Recycled)