Pitney Bowes DP50S Hardware Manual page 31

10. Lift the front of the tray, and slide it carefully into the printer until it stops.
11. On the rear of the unit, attach two brackets using the remaining screws.
Tighten the screws firmly using a coin.
12. Plug in the power cable, and then turn on the printer.
13. Print the configuration page to confirm that the unit was attached correctly.
• To confirm whether the optional paper feed unit was correctly attached, print the configuration
page, and check "Attached Equipment" on the configuration page. If the unit was attached cor-
rectly, the following will be displayed:
BMW047S
BMW048S
BMW049S
Attaching the Paper Feed Unit
2
29