Pitney Bowes DP50S Hardware Manual page 74

5. Paper and Other Media
5. Pinch the clips on the end guide (
Confirm that there are no gaps between the paper and paper guides. If there are gaps, adjust
the guides.
6. Lock the side guides.
5
7. Push the paper tray carefully into the printer until it stops. If you push the tray forcefully, the paper
guides might move.
• For details about types of paper supported by this printer, see "Supported Paper for Each Tray".
Setting paper size not selected automatically
Set the paper size using the control panel when loading paper whose size cannot be selected automati-
cally.
72
), and match the guide to the paper size (
BEK191S
BMV057S
).