Pitney Bowes DP50S Hardware Manual page 67

Supported paper feeding tray
Duplex printing
Additional cautions
Coated paper
Printer setup
Printer driver setup
Supported paper feeding tray
Duplex printing
Any input tray can be used.
Make sure paper is not stacked higher than the
upper limit mark (
the bypass tray, make sure paper is not stacked
higher than the paper guides inside it.
Not supported
• Print speed is slightly slower than when using
plain paper.
• If the paper is curled, flatten it before loading
• Fan the paper before loading it. When using
the bypass tray, set the paper one page at a
time if multiple sheets are fed, paper jams oc-
cur, or you hear a strange noise.
Select [Paper Input] [Paper Type: (tray name)]
[Coated Paper].
Select [Coated paper] in [Paper type].
Any input tray can be used.
Make sure paper is not stacked higher than the upper
limit mark ( ) inside the tray. When using the bypass
tray, make sure paper is not stacked higher than the
paper guides inside it.
Not supported
Paper Recommendations
) inside the tray. When using
5
65