Pitney Bowes DP50S Hardware Manual page 62

5. Paper and Other Media
Paper capacity
5
Duplex Printing
Additional Cautions
Middle Thick
Paper Thickness
Printer setup
Printer driver setup
Supported paper feeding tray
60
• Tray 1, 2: 550
• Tray 3: 1000 (1000-sheet paper feed unit) or
2000 (2000-sheet paper feed unit)
• Tray 4:550
• Tray 5: 550
• Bypass tray: 100
Make sure paper is not stacked higher than the
upper limit mark ( ) inside the tray. When using
the bypass tray, make sure paper is not stacked
higher than the paper guides inside it.
Supported
• Default: [Plain Paper 2]
• When loading paper with a weight of 60 to
74 g/m² (16 to 20 lb.), change the plain paper
setting to [Plain Paper 1]. To do this, press the
[Menu] key, and select [Maintenance] on the
display. Select [General Settings], then [Plain
Paper Setting], and then select [Plain Paper 1].
91 to 105 g/m² (24 to 28 lb.)
Select [Paper Input] [Paper Type: (tray name)]
[Middle Thick].
Select [Middle Thick] in [Paper type].
Any input tray can be used.