Pitney Bowes DP50S Hardware Manual page 155

Changing the settings with printer driver may help to speed up printing.
See the printer driver Help.
• The data is so large or complex that it takes time to process it. If the Data In indicator is blinking,
the data is being processed. Just wait until it resumes.
• If "Please wait." appears on the display, the printer is now warming up. Wait for a while.
Images are cut off, or excess pages are printed.
• If you are using paper smaller than the paper size selected in the application, use the same size
paper as that selected in the application. If you cannot load paper of the correct size, use the
reduction function to reduce the image, and then print. See the printer driver Help.
The color of the printout is different from the color on the computer's display.
• The colors made using color toner are different from colors displayed on the display in its produc-
tion system.
• When [Toner saving] is checked under the "Print Quality" tab in the printer driver's dialog box, the
color gradation may appear differently. See the printer driver Help.
Color changes extremely when adjusted with the printer driver.
• Do not extreme settings for the color balance under the "Print Quality" tab in the printer driver's
dialog box.
Please note that the sample image displayed in the printer driver is used only to show what pro-
cessing will be performed, so may not match the print results. See the printer driver Help.
Photo images are coarse.
• Some applications lower the resolution for making prints.
Raise the resolution in the settings for that application.
Color documents are printed in black and white.
• The printer driver is not set up for color printing.
See the printer driver Help.
• Some applications print color files in black and white.
Fine dot pattern does not print.
• Change the [Dithering:] setting in the printer driver's dialog box.
See the printer driver Help.
Printing Problems
153
9