Film Jam In Cooling Unit - Konica Minolta DRYPRO Model 793 Operation Manual

Ch.6 Troubleshooting

6-3-1 Film Jam in Cooling Unit

Error codes "E4810" and "E4811" indicate the film jam occurred in the Cooling Unit.
Remove the jam film according to the following procedure.
The HPRO Unit and the Ejection Transport Unit may be heated very hot (60˚C or
higher). Remove the jam film after the unit is left for a while to cool down.
The DRYPRO 793 contains internal components that produce high temperatures. Do
not touch any parts other than those specified.
DRYPRO Vstage MODEL 793 Operation Manual Ver.1.01 2005.1
1
Pull and remove the jam film by hand when the
leading edge of the film is coming out of the
Ejection Transport Unit and stuck.
- If the film cannot be located at the exit of the Ejection
Transport Unit, proceed to the step 2.
2
Disengage the Front Cover Lock Lever, and
open the Front Top Cover.
3
Turn the Lever-A (green) counterclockwise.
- The Deodorant Filter Case Lock will be disengaged.
< 129 >
Animation of Jam
Release in the Cooling
Unit.