Konica Minolta DRYPRO Model 793 Operation Manual page 93

Ch.4 Maintenance Mode
The test print for which the bin is specified in "Test Print Bin" means "SMPTE
Pattern (including mammo)" and "Calibration Sheet".
10
DRYPRO Vstage MODEL 793 Operation Manual Ver.1.01 2005.1
7
Touch the arrow [t], [s] buttons to select the
"TEST PRINT BIN".
7 - Touching the arrow [t], [s] buttons will switch between
"TOP" and "BOTTOM".
8
Touch the arrow [t], [s] buttons to select the
"JAM FILM BIN".
- Touching the arrow [t], [s] buttons will switch between
"TOP" and "BOTTOM".
8
9
Touch the arrow [t], [s] buttons to select the
"SMALL SIZE FILM BIN".
- Touching the arrow [t], [s] buttons will switch among
"TOP", "BOTTOM" and "DICOM/P-CON" (follows the
setup made on the input device or DRYPRO 793).
9
10
Touch the [SAVE] button.
- Returns to the "Maintenance Mode (Other Setup)"
screen after saving the settings.
< 91 >