Konica Minolta DRYPRO Model 793 Operation Manual page 38

Ch.3 Operation
6
DRYPRO Vstage MODEL 793 Operation Manual Ver.1.01 2005.1
4
Remove the Sandwich Paper left in the Supply
Tray.
5
Lift the Pressure Plate, and pulled out the Film
Package that has been wounded up by the
winding shaft.
6
Touch the [Next] button on the Touch Panel.
- An animation showing the film lading (film set) proce-
dure will be displayed.
7
Take out the new film package from the carton,
and place it in the Supply Tray so that the barcode
on the package aligns to the left of the front.
< 36 >
Dispose of the Film
Package after removing
the sandwich cardboard
according to the regula-
tions of the local gov-
ernment.
Animation of film load-
ing.
Illustration on the film package