Konica Minolta DRYPRO Model 793 Operation Manual page 135

Ch.6 Troubleshooting
Do not pull out the jam film through the Jam Release Cover.
Pay attention to the film so that it will not be caught on the
way to the Left Cover.
DRYPRO Vstage MODEL 793 Operation Manual Ver.1.01 2005.1
4
Open the Jam Release Cover-B (1 in the left
fig.), and send the jam film to the left (2 in the
left fig.).
- The film sent to the left can now be located through the
opening of the Left Cover.
5
Hold and pull out the film stuck in the Descent
Transport Unit.
6
Close the Left Cover by hand.
7
Close the Jam Release Cover-B.
- If jam release is successful at this point, proceed to the
step.13.
- If a jam film cannot be located at this point, proceed to
the step.8.
< 133 >
Animation of Jam
Release in the Descent
Transport Unit. 2
Animation of Jam
Release in the Descent
Transport Unit. 3