Konica Minolta DRYPRO Model 793 Operation Manual page 103

Ch.5 Web Maintenance Mode
5-1-1 User Level of the Web Maintenance Mode
Alike the Maintenance Mode operated from the Operation Panel of the DRYPRO 793, authority level
of the users who perform the Web Maintenance can be set.
This user level is classified into three levels, and the scope of functions that can be operated by each
user level is defined.
Similar to the user level setting for the access from the Operation Panel, a password is required for
Level 2 and Level 3.
Level 1 : Alteration of the settings is not allowed. (same as the Menu Mode)
Level 2 : In addition to the operation authorized in Level 1, reprint of the print data is allowed.
Level 3 : Alteration of all maintenance items, setup of the start timer, reprint of the print data are
allowed.
When no classification in user level is set, all users accessing the Maintenance Mode
are entitled to behave as a user of Level 3.
- It is possible to access several DRYPRO 793s from several Web browsers opened on
the same PC. However, it is not possible to access one DRYPRO 793 from several
Web browsers opened on the same PC.
- Maximum number of the Web Maintenance Mode that can be activated at the same
time on the network is 16.
- While the DRYPRO is accessed in the Web Maintenance Mode, the DRYPRO 793 can-
not receive the print data from the diagnostic device nor print the data as that
applied to the Maintenance Mode from the Operation Panel. Unprinted jobs stored in
the job files will be printed upon termination of the Web Maintenance Mode.
- It is not possible to access at the same time using the Level-3 from the Operation Panel
of the DRYPRO 793 and the Web Maintenance.
DRYPRO Vstage MODEL 793 Operation Manual Ver.1.01 2005.1
< 101 >