Error Reset - Konica Minolta DRYPRO Model 793 Operation Manual

Ch.6 Troubleshooting

6-2 Error Reset

When an error occurs in the DRYPRO 793, an error message is displayed and the [ERROR RESET] button appears.
After resolving the error following instructions shown in the error display, reset the error display by touching the [Error
Reset] key.
1
2
DRYPRO Vstage MODEL 793 Operation Manual Ver.1.01 2005.1
1
When "INTERVAL" is selected for the error
sound in "Touch Panel " of the Maintenance
Mode, Touch the [BEEP STOP] button that
appears when an error occurs.
- Beep sound stops.
- [BEEP STOP] button disappears as the beep sound
stops.
2
Touch the [ERROR RESET] button.
- An message indicating that the error is being reset, then
returns to the Normal screen.
- When it is necessary to delete the job that causes the
error, a message inquiring whether to delete the job or not
will appear.
Touch the [YES] button to delete the job, followed by a
message indicating that the error is being reset, and
returns to the Normal screen.
Touch the [NO] button to return to the Normal screen
without deleting the job.
< 126 >