Konica Minolta DRYPRO Model 793 Operation Manual page 31

Ch.3 Operation
4) Status Info : Displays the current status of the DRYPRO 793.
When Lis-793 or Supply 3 Tray is equipped on the main unit, each illustration will be
displayed, and the cover position is displayed when it is open.
5) [Start Timer] Button : Touch this button to set the start timer. this button will not be
displayed when "OFF" is set for all days of the week.
6) [Menu] Button : Switches between the Menu Mode and Maintenance Mode, where
Menu Mode enables to check the job currently in printing and to check various set-
tings of the DRYPRO 793, while the Maintenance Mode to alter the settings and to
perform check and maintenance.
7) Warmup Progress Bar : In the warmup process, it indicates the remaining time
before it reaches the Ready status. One scale corresponds to approx. two minute.
8) [Error Reset] Button : Appears when an error occurs.
Touching this button initiates the reset sequence of the DRYPRO 793.
9) [Filter Change] Button : Appears when it comes close to the date when the filter
should be replaced. Touching this button displays the "Filter Change" screen.
10) [Regular Mainte] Button : Appears when it comes close to the date when the regu-
lar maintenance should be performed. Touching this button displays the "Regular
Mainte. Item List" screen.
11) [BEEP STOP] button : When "INTERVAL" is selected for "ERROR ALARM SET-
TING" of "Touch Panel Setting" of the Maintenance Mode, this button appears upon
occurrence of error or film empty. Buzzer keeps going intermittently until this button is
pressed.
12) [Dust Cleaning] Button : Appears when the cleaning roller needs cleaning. Touch-
ing this button displays the "Dust Cleaning" screen.
13) Film Jam Location Info : When a film jam occurs, location of the stuck film is dis-
played. Touching the [Error Reset] button displays "Jam Release" screen.
Above 7) through 13) appears only when they are necessary. They disappear
when they become unnecessary.
DRYPRO Vstage MODEL 793 Operation Manual Ver.1.01 2005.1
< 29 >
p.82 Start Timer
p.47 Maintenance
Mode
p.30 Startup
p.126 Error Reset
p.142 Replacement
of Deodorant
Filter
p.147 Display and
Check of the
Maintenance
& Inspection
p.86 TOUCH
PANEL
p.95 Dust
Cleaning
p.128 Resolving
the Film Jam