Ch.6 Troubleshooting
Do not pull out the jam film through the Jam Release Cover.
DRYPRO Vstage MODEL 793 Operation Manual Ver.1.01 2005.1
8
Press the Lever-C, and open the Right Cover.
9
When the jam film is located,pull it out by hand.
- When the removal of the jam film was successful, pro-
ceed to the step 6.
- When the jam film cannot be located, proceed to the
step 4.
10
Open the Jam Release Cover-C (1 in the left
fig.), and send the jam film to the left.
- The film sent to the left can now be located through the
opening of the Right Cover.
11
Pull out the film jammed in the Elevator Trans-
port Unit.
12
Close the Jam Release Cover-C.
13
Close the Right Cover.
< 134 >
Animation of Jam
Release in the Descent
Transport Unit. 4
Animation of Jam
Release in the Descent
Transport Unit. 5